The EasyLan Component Rack system provides a high degree of flexibility and adaptability. Depending on the requirements, five different component racks are available for selection. A selection between pre-configured solutions and the on-side configuration for fiber optic (FO) and copper components can be made for component mounting.
EasyLan manufactures all configurations (LC, MTP®, SC, ST, MU) and metal sheet machining in their own European plants. This means that special requests as, for example, customized gradations of the FO trunks, measurement and test reports of the FO products, special labels and markings, special colors for the powder coated surfaces, customized prints on the front plates, material requests (aluminum, brushed aluminum, steel sheets powder coated) can be coordinated specifically for each project.
Flexible & adaptable
The system can be assembled flexible and can also be changed afterwards. The decision concerning pre-configured or on-side configuration does not have to be taken in advance. Even certain accessories can be installed later.
No special installation needed on location
Every modul rack is already pre-assembled and will be delivered including card guides. Therefore every modul rack can be placed in racks without any former installation.
Modul Racks
- Available in 1U (for 3x plug-in modules), 3U (for 12x plug-in modules), 4U (for 12x plug-in modules), Side – Modul Rack (for 2x plug-in modules)
- 4U Modul Rack available with fixed or extendable overlength drawer
- Color RAL 7035
Pre-Assembled FO
- FODH plug-in modul 3U / 7HP available with 6x LC-Duplex, 6x LC-Quad, 6x SC-Duplex, 12x ST, 12x LSH (manufacturer success4u or Huber&Suhner)
- Possibility to label ports individual due to already mounted labelling area
- FODH / 2: 4 – 144 fibers, LC / LC UB / SC / ST / LSH, aluminium - distributor
- FODH / E: 4 – 24 fibers, LC / LC UB / SC / ST / LSH, plastic distributor
- For assembling in FODH plug-in module there is a special length gradation needed
Pre-Assemebled Copper
- Plug-in module with pre-assembled DC preLink® jacks,
- Labelling strip can be mounted afterwards
- Pre-assembled preLink® system cable – available in AWG24-22 / AWG27-26
- Cat.6A ISO/IEC
- preLink® system cable only has to be pluged in module / no special tool needed
Cable management
- Routing panel 1U 2C 75 / 100mm – in compliance with bending radius in FO area
- Routing panel 1U steel powdered 60 / 110mm
- Routing panel 1U with 5x plastic clamps
- Lateral cable guide 2C 75 / 100mm
- Lateral cable guide with rubber crown
On-Side Configuration FO
- Spice plug-in module 3U / 7HP available with 6x LC-Duplex, 6x LC-Quad, 6x SC-Duplex, 12x ST, 12x LSH (manufacturer success4u or Huber&Suhner)
- Adaptors, splice cassette and overlengths are placed in compliance with the bending radius >50mm
- Labelling strip can be mounted afterwards
- Universal cable with central tube 4 – 24 fibers, OM3, OM4, OM5 and OS2
- Universal cable with stranded loose tube 48 – 144 fibers, OM3, OM4, OM5 and OS2
On-Side Configuration Copper
- Keystone plug-in module 3U / 7HP, 6x Keystone, RAL 7035
- Labelling strip can be mounted afterwards
- Copper cable up to 1500MHz / available fire classes B2ca, Dca / AWG22/1 – AWG23/1
- fixLink® keystone jack Cat. 6A ISO/IEC, PoE up to 100 watt, toolless assembling, GHMT PVP, link certificates
Accessories
- Copper Patch Cord Flexboot
- Copper Patch Cord DualBoot
- Copper Patch Cord DualBoot PushPull
- Copper Patch Cord DualBoot LED
- Copper Patch Cord VarioBoot
- FO Patch Cord LC-D UniBoot PushPull